It’s not until later that the performance of a lift-station can be assessed. Flow calculations, site elevations, system pressure water properties, peak conditions accessibility to maintenance, control, and capacity in the future all impact the final design of the structure.
When comparing lift station designers for a particular project It’s not just about who will specify the pumps. Who can translate the conditions of the site into a complete, practical system that is simple to install, maintain, and operate?
Image credit: romtecutilities.com
The Limits of Gravity Are a Reality
Gravity is the most efficient means to move wastewater. However the terrain and patterns of development do not always work to favor this method. It’s possible that new industrial, residential and commercial sites are too in the air, too far away or situated in areas where gravity sewer expansion isn’t feasible.
A lift station is the necessary force to move wastewater toward the next part of the collection system. Yet designing one requires understanding both the normal and less favorable situations, for instance, peak inflows pumps, maintenance of pumps or equipment malfunction, or future increases in demand.
The companies that are considered among the best wastewater engineers should therefore consider the entire issue of conveyance rather than considering the station as an individual part of the equipment.
Existing infrastructure makes the problem more complicated
The problem is not building new structures. In addition to maintaining the essential infrastructure for wastewater municipalities are often required to upgrade or replace old stations.
Wet wells that are in use, force mains electric services, controls, boundary lines for the site, as well as downstream infrastructure may limit the design. Engineers will have to determine which elements can remain and what needs to be replaced, and which new components are needed.
Romtec Utilities offers pumping solutions for municipal, private industrial, commercial, and retrofit applications. Pumping systems can be adapted to meet the particular requirements of every project.
Stormwater has rules that are different
The best stromwater system designers using the supplied search terminology must solve a different hydraulic problem. Stormwater systems can undergo dramatic changes in volume depending on the amount of rainfall, drainage area, capacity for detention, and permissible discharge rates.
Stations that are serving detention basins for instance, could need to temporarily store runoff until pumping it out at a set rate. Engineers should take into consideration the head and flow conditions, environmental needs and objectives for flood management, as well as the characteristics of the drain system that is receiving.
Prefabrication is a method to move the work off-site
The complexity of field assembly may create scheduling conflicts, mistakes in installation, change orders and delays. Romtec Utilities performs significant prefabrication of equipment prior the installation site is constructed.
In a controlled environment in a controlled setting, working on more assembly and quality control can speed up the amount of work that is done on the field. Based on Romtec’s plan approach certain projects that would otherwise take weeks could be completed in a matter of days, based on project conditions.
The Commissioning Process is key element in engineering Success
A station isn’t a guarantee simply because every part has been put in place. Romtec Utilities offers installation advisors to assist with construction such as startup check of the control panel pumps, operation testing, and training for personnel. The documentation also includes information that users can refer to when they maintain the system or considering future expansion.
This last stage is crucial for those who are looking for the most reputable lift station design. A successful engineering project must produce more than an acceptable set of drawings. The owner should be left with a functioning system and a skilled staff, as well as useful documentation, and equipment designed in accordance with the requirements the station is expected to face in daily operation.